Yes, an adapter for an existing sleeve combination (Top A and Bottom B) has just been released and can be ordered via the link to our contact us page. Please enter all details and includng your delivery address. State you require the Adapter 2 for the 6th Gen Nano and it will be sent to you free of charge.
No. it will take a number of minutes for the Apple product to get a minimum level of charge before it can connect and become operational. So please connect and wait for the unit to initialise.
Some iPhone models may intermittently display the message, “This accessory is not made to work with iPhone. Would you like to turn on Airplane Mode to reduce audio interference? You will not be able to make or receive calls.” when initially docked with any Fusion iPhone compatible product . All Fusion iPhone supported products have been tested and certified by Apple, and passed Apple’s stringent “Works With iPhone” Self-Certification Test. All Fusion iPhone compatible products are fully-functional and compatible with Apple’s iPhone product line, despite this message. Please chose “NO”, or simply wait for this message to “time out”.
NO. iPod/iPhone video playback is only supported when the Marine portable media Dock MS-DKIPUSB is connected to the MS-RA200. There is a composite video out RCA connection on the rear of the dock which enables Video playback to a compatible TV or Monitor.
The first thing to check is that the USB device is formatted to FAT 32 and contains MP3 files as that is the only file type supported. The first software version for the MS-RA200 10.1573 supported USB file name and path lengths to a maximum length of 99 characters. There is an update available for the Operating Software of the MS-RA200 which incorporates an increase in the number of allowed characters. To check the software version you have currently enter the “Settings Menu” then select “About” and the version should be 10.1573. To get the update contact Fusion Tech Support via the link Tech Email
The below chart is a current list of sleeve combinations available for Fusion iPod inside product.
IMPORTANT: Your FUSION iPod inside product may not support the latest Apple products.
A compatible sleeve does not imply support of an Apple product. For support refer to your FUSION iPod inside product.
Note: iPod nano (Gen 3) – the iPod must be placed inside the adapter sleeve, and then placed inside Dock sleeve combination A.
Top Sleeve Bottom Sleeve
If your Head unit displays ‘No iPod connected’ while in iPod source the first thing to do is check you are using the correct sleeve combination. If you have the incorrect sleeve combination this could prevent the iPod connector from mating correctly, it could also damage the connector in the dock or your iPod/iPhone.
If you are uncertain which iPod model you have to ensure you have the correct sleeve combination, go to http://www.apple.com/support/ and get the correct model information of your iPod.
Once you know for certain you have the correct sleeve combination and if you are still having a connection issue, the next step is to ensure you have the latest version of Operating Software installed in your iPod/iPhone and the latest iTunes version. You can check this by connecting your iPod/iPhone to iTunes and it will check and/or prompt you to download the latest version.
Once you have confirmed that you have the latest versions or updated your iPod/iPhone, if the issue persists you should reset the iPod /iPhone ( see the user manual for your Apple product) and also reset the Head unit (Fusion User manual). If you continue to get the ‘No iPod Connected’ message you should contact your Fusion dealer or contact Fusion via the Tech email.